Cap size
Set the diameter band, off-size tolerance and whether whole mushrooms or cap-focused pieces are required.
CHINA-BASED B2B SUPPLY
IQF Frozen Nameko Matched by Cap Size and Stem Condition
We supply IQF frozen nameko as whole mushrooms, trimmed caps, halves and chopped pieces for soups, sauces, noodle dishes, prepared meals and foodservice. We confirm cap size, stem length, cap-stem integrity, natural surface condition, broken pieces, packing and documents against the intended use.
For a useful quotation: send the form or grade, application, quantity, pack, destination, document needs and timing.
- Ingredient
- 100% nameko; no other ingredient.
- Origin
- China
- Available forms
- Whole · Caps · Halves · Chopped
- Storage
- −18°C or below
- Shelf life
- 24 months from production date
- Lead time
- 7–21 calendar days after order confirmation. Order confirmation occurs only after written approval of the specification, packaging or artwork, purchase order and agreed payment milestone. Ocean transit and destination customs clearance are excluded.
Specify Nameko by Cap Size, Stem Length and Integrity
Nameko's small cap, stem balance and characteristic surface influence presentation and texture. Buyers should define the acceptable whole or cut condition before comparing offers.
Stem condition
Define maximum stem length, trimming and detached-stem tolerance for the chosen grade.
Surface and breakage
Approve natural surface appearance, clumps, broken caps and damaged-piece limits on a frozen sample.
Cooking result
Check cap integrity, bite and broth or sauce behavior in the real application.
STANDARDS & PROGRAMS
Food Safety and Certification Support
Tell us the standard, destination and customer requirement. We provide certification and production details with the product and quotation.
YOUR QUALIFICATION FILE
Ask for the documents your team needs.
Certificates, registrations and organic documents are included with the quoted product and destination-market file.
- Product specification
- Sample approval record
- Lot COA
- Microbiological report
- Pesticide-residue report
- Heavy-metal report
- Certificate of origin
- Health / phytosanitary file
- Packing and shipment documents
Choose the Nameko Form That Fits the Process
Whole nameko supports the clearest cap-and-stem presentation; trimmed caps reduce stem length; halves and chopped pieces fit controlled dosing. Working references include 10–25 mm caps, with stem length and cut dimensions confirmed by selected form and final specification.
Compare every declared form and size
| Declared form | Size | Within size | Off-size |
|---|---|---|---|
| Whole | 10–25 mm cap diameter; stem maximum 15 mm | At least 90.0% by mass within the declared size | Maximum 10.0% by mass |
| Caps | 10–25 mm diameter; stem maximum 5 mm | At least 90.0% by mass within the declared size | Maximum 10.0% by mass |
| Halves | 10–25 mm cap diameter | At least 90.0% by mass within the declared size | Maximum 10.0% by mass |
| Chopped | 10–20 mm | At least 90.0% by mass within the declared size | Maximum 10.0% by mass |
no unit more than 20.0% below the lower limit or above the upper limit.
Confirm Nameko Form and Condition for the Program
We coordinate declared identity, China supply route, cap grade, stem requirement and frozen-stock position for the order. Repeat purchases should retain the approved cap size and condition reference.
| Decision field | What we confirm | Why it matters |
|---|---|---|
| Presentation | Whole, trimmed caps, halves or chopped pieces | Defines the visible product and portioning |
| Cap and stem grade | Cap diameter, stem length, trimming and detached stems | Controls consistency and usable yield |
| Physical condition | Natural surface, clumps, broken caps and foreign material | Protects receiving and cooking performance |
| Commercial plan | Quantity, pack, destination, documents and timing | Supports current route matching |
Release Nameko on Cap Grade, Stem Condition and Cleanliness
Confirm product identity, form, cap diameter, stem length, off-size and broken pieces, detached stems, surface ice or clumps, color and odor, foreign material, chemistry, microbiology and agreed destination tests.
Available forms4
Storage−18°C or below
Shelf life24 months from production date
Declared size10–25 mm cap diameter; stem maximum 15 mm
Off-size limitMaximum 10.0% by mass
Physical and sensory controls13 controls
| Control | Quality limit | Method summary |
|---|---|---|
| Colour | Characteristic colour of the declared mushroom species; maximum 5.0% by mass materially darkened or discoloured. | Visual, sensory or mass-fraction inspection |
| Flavour and Odour | Clean, characteristic nameko flavour and odour after cooking or thawing as relevant; no sour, fermented, musty, rancid or other foreign odour. | Visual, sensory or mass-fraction inspection |
| Texture and Maturity | Sound, clean and fleshy; at least 90.0% by mass within the declared maturity and form; no slimy, woody or water-soaked tissue. | Visual, sensory or mass-fraction inspection |
| Broken or Damaged | Maximum 10.0% by mass broken or mechanically damaged pieces. | Visual, sensory or mass-fraction inspection |
| Discoloration | Maximum 5.0% by mass materially discoloured units. | Visual, sensory or mass-fraction inspection |
| Surface Ice | Maximum 5.0% by mass loose surface ice and frost. | Frozen sample inspection at −18°C |
| Clumps | Maximum 5.0% by mass units remaining in clumps after one gentle manual separation at −18°C. | Frozen sample inspection at −18°C |
| Extraneous Matter | Maximum 0.10% by mass extraneous plant or mushroom matter. | Visual, sensory or mass-fraction inspection |
| Hazardous Foreign Material | 0 pieces of glass, hard plastic, stone, metal, wood or other hazardous foreign material in each 10 kg inspection sample. | Defined sample visual inspection |
| Decay, Mould and Insects | 0 mouldy, decayed or insect-infested units in each 10 kg inspection sample. | Defined sample visual inspection |
| Free-Flowing | Minimum 95.0% by mass free-flowing for IQF piece formats. | Frozen sample inspection at −18°C |
| Thawing Loss | Maximum 38.0% by mass after thawing for 24 hours at 4°C and draining for 2 minutes. | Controlled thaw-and-drain test |
| Metal Detection | Every packed unit passes a validated detector set at Fe 2.0 mm, non-Fe 2.5 mm and stainless steel 3.0 mm test-piece sensitivity. | Validated detector verification |
Chemical and product-specific controls8 controls
| Control | Quality limit | Method summary |
|---|---|---|
| Species Identity | Declared species only; 0 undeclared mushroom species in each 10 kg inspection sample. Morphology is checked for every lot; ITS DNA sequencing is required for initial supply-route qualification and every disputed lot. | Lot morphology review; ITS DNA sequencing |
| Cap or Ear Size | 10–25 mm cap diameter | Caliper or graduated sieve |
| Stem Length | Stem length maximum 15 mm | Caliper |
| Sulphur Dioxide | <10 mg/kg; no sulphur dioxide or sulphite added | Validated total SO₂ method |
| Food Additives | 0 added food additives | Ingredient and process-record review |
| Preservatives | 0 added preservatives | Ingredient and process-record review |
| Pesticide Residues | Every analyte at or below the destination-market MRL relevant to Nameko | Destination-market multiresidue method |
| Heavy Metals and Regulated Contaminants | Every analyte at or below the product-specific destination-market maximum level | Validated ICP-MS or destination-recognized method |
Microbiological controls8 controls
| Control | Quality limit | Method summary |
|---|---|---|
| Aerobic Plate Count | ≤500,000 CFU/g | ISO 4833-1 / FDA BAM Chapter 3 |
| Coliforms | ≤1,000 CFU/g | ISO 4832 / FDA BAM Chapter 4 |
| Escherichia coli | <10 CFU/g | ISO 16649-2 / FDA BAM Chapter 4 |
| Staphylococcus aureus | <10 CFU/g | ISO 6888-1 / FDA BAM Chapter 12 |
| Yeasts | ≤1,000 CFU/g | ISO 21527-1/2 |
| Moulds | ≤1,000 CFU/g | ISO 21527-1/2 |
| Salmonella | Not detected 25 g | ISO 6579-1 / FDA BAM Chapter 5 |
| Listeria monocytogenes | Not detected 25 g | ISO 11290-1 / FDA BAM Chapter 10 |
How the documents work: our master targets guide qualification and quotation. The signed specification defines your order, and the COA reports the identified production lot against the agreed test scope.
From Raw Material to a Released IQF Frozen Nameko Lot
We confirm the relevant cleaning, trimming, cutting, preparation and freezing route. Size grading, metal detection, packing and lot release then follow the approved nameko form and condition.
ONE CONNECTED PROCESS
Your specification travels with the product.
Declared species identified, sorted, cleaned, trimmed, cut to the declared form, hot-water blanched for 90–180 seconds at 90–98°C, rapidly cooled, individually quick frozen, graded, metal detected, packed and stored frozen.
These photos show a production route used for iqf frozen nameko. We confirm the process route, line and lot controls against your specification.Explore the processing-flow library →
Plan & receive
We check product identity, crop condition and lot reference before processing. This iqf frozen nameko checkpoint shows the handling stage; process steps and records are confirmed against your specification.
Prepare
The team follows the agreed form, size and handling requirement. This iqf frozen nameko checkpoint shows the handling stage; process steps and records are confirmed against your specification.
Freeze & control
We align the freezing method and control plan with the product form, specification and order volume. This iqf frozen nameko checkpoint shows the handling stage; process steps and records are confirmed against your specification.
Inspect & release
We connect release checks, packing and lot records to the purchase order. This iqf frozen nameko checkpoint shows the handling stage; process steps and records are confirmed against your specification.
- 01
Plan and receive
Confirm product identity, origin direction, condition and lot-identification requirements.
- 02
Prepare and form
Clean, sort and prepare the declared nameko form and size.
- 03
Freeze and control
Apply the confirmed treatment, freeze the product and check separation, condition and foreign material.
- 04
Pack and release
Verify packing, lot code, label, metal-detection control and agreed release records.
Packing and Applications for Nameko
Whole caps require handling that protects small cap-and-stem pieces. Industrial, foodservice and retail formats add different fill, film, seal, artwork, case and loading controls.
Packing family examplesChoose a family below
1 × 10 kg1 × 20 lb1 × 40 lb1 × 20 kg
Application — updates the recommendation below
Packing family — updates the image and case options above
Pack construction: Food-grade PE liner and export carton; plain bag, adhesive label or printed bag; barcode and customized carton marks.
Loading plan: Pallet loading, floor loading or food-grade tote format as stated in the confirmed purchase order.
Keep the Nameko Approval Connected to the Lot
Nameko approval should connect cap size, stem length, natural surface, broken pieces and sensory condition to the sample and signed specification. We coordinate the relevant lot and packing records against that reference.
Photograph supplied by XMG for buyer review. We confirm which facility, test scope and release record apply to the quoted product.
Confirmed supply plan
We confirm product, origin, process, certification scope, capacity and delivery timing before quotation.
Signed specification
We connect the confirmed form, size, tolerances, packing and release criteria to the purchase order.
Sample approval
Where required, we organize a representative sample and keep the approval reference with the order.
Lot release records
We coordinate the agreed COA, inspection and laboratory records for the identified production lot.
Packing verification
We confirm pack construction, label or artwork, carton marks, coding and loading basis.
Shipment coordination
Our commercial team keeps product, document, cold-chain and shipment milestones connected.
Our commercial team keeps the approved specification, release records, packing details and shipment file aligned from order confirmation through dispatch.
From Buyer Brief to an Order-Ready File
Send the form, cap and stem requirement, application, quantity, pack, destination, tests and timing. We will identify the specification, sample, facility-document and shipment-record points for the quoted route.
Build the document request your team actually needs. Select one or several items. Your choices will travel with the product inquiry.
0 of 5 selectedYour document request is taking shape.
Attached to this product inquiryThe order file includes certificate, production, product, lot and destination-market documents.
All document types selected
Your qualification request is ready to carry into the inquiry.
Share the requirement
Tell us the application, form or size, pack, quantity, destination and timing.
Supply proposal
We provide the specification, sample plan, certification scope, packing and quotation basis for review.
Approve and place the order
Your written approvals and purchase order lock the production, document and shipment plan.
COLD-CHAIN HANDOFF
We keep the released lot connected to the load.
- Frozen storage at −18°C or below
- Carton marks, lot code and quantity check
- Container, seal and loading record
- Shipment documents tied to the order
Nameko characteristics and preparation guides
Why Nameko Mushrooms Have a Gel-Like Surface
Nameko has a naturally slippery surface, but the coating and the condition of a particular pack are separate questions. Explore water-rich mucilage, the limits of extract research and practical ways to assess texture in the actual cooked dish.
Read the guide →Related buyer guides
Product specifications & samplingSee how a buyer brief becomes a signed specification and approval reference.Open →Quality control & inspectionReview incoming, in-process, release and pre-shipment decisions.Open →Packing optionsCompare bulk, foodservice and private-label packing requirements.Open →IQF Frozen Nameko Buyer FAQ
Use these answers to prepare your product inquiry. The quotation states product availability, specification, packing and delivery timing.
Which IQF frozen nameko forms can XMG supply?
Working options include whole mushrooms, trimmed caps, halves and chopped pieces. Cap size, stem length, cut and current availability are confirmed in the quotation.
How is nameko cap size specified?
State the target diameter band, off-size allowance and sampling method. Current whole-cap references are commonly built around 10–25 mm, subject to final approval.
Can stem length be controlled?
Yes. Define the maximum stem length, trimming direction and tolerance for detached or broken stems in the signed specification.
Is the natural surface coating a defect?
Nameko can have a characteristic surface condition. Approve the expected frozen and cooked appearance on a representative sample and separately define unwanted clumps or surface ice.
Will whole caps remain intact after cooking?
Result depends on grade and the cooking process. Test the proposed cap grade in the actual soup, sauce or meal and record the acceptable breakage and texture.
Can nameko be packed for foodservice or retail?
We coordinate net weight, bag or liner, carton, artwork, coding, label language and loading requirements with a suitable route.
Which tests and documents can be supplied?
Tell us the destination and approval list. We confirm production facility certificates, product documents, lot COA, agreed tests and shipment records for the order.
What is needed for a nameko quote?
Send form, cap size, stem condition, application, quantity, pack, destination, tests, documents and timing. A current specification or benchmark sample helps shorten review.
PRODUCT INQUIRY
Request a Quote for IQF Frozen Nameko
Your selected form, size, packing and application stay attached as you review or change them.
Your selection
IQF Frozen Nameko
0
Only your work email is required. Your product and selected specifications are attached automatically.
We protect your information and use it only to respond to your inquiry.